Blade SS 2.4GHz RTR Nitro is a legendary RC car by VRX Racing. SS, Single Speed, informs about one-degree gear ratio and equals N1.
Universal truggy construction, failure-free internal combustion engine, and high quality are main advantages of our car.
It has this one thing. Based on VRX-1 in the scale of 1:8, it has its dynamic body, driving qualities, and high quality. It is easy to use, even for the beginners.
It can reach high speeds, and drive off-road. Wide wheels spread guarantees stability on turnings, appropriate track gauge, and 4WD, so you can get crazy when other cars do not ride. The engine guarantees to you easy igniting and is failure-free. The 18 cu is from the top shelf in the scale of 1:10. You get a big surplus of power.
VRX uses slide clutches. It prevents excessive straining of mechanical elements and engine, so the lifespan of the model is higher than other producers’ cars. The cars have bearings, so the rolling resistance is lowered.
The model is equipped with metal sprocket wheels of drive transition and metal sprockets of differential gears. Plastic elements are made from more elastic materials, so they are less prone to cracking. It has a special waterproof module! It has resistant, metal floorboard.
The cars are gladly chosen by both advanced modelers and the beginners.
To start the play, do not forget to buy the necessary accessories, i.e. nitro Rapicon fuel, the bottle for refueling, the clip for spark plug ignition, the wrench for spark plugs and wheels, batteries, and accumulators. It is worth to buy preparation for the conservation of the engine, extra spark plug, filter of petrol, and IR thermometer.
- Akumulator: nie dotyczy
- Długość : 415 mm
- Napęd: 4WD
- Podwozie: Truggy
- Radio: 2.4GHz
- Silnik: spalinowy żarowy (nitro)
- Skala: 1:10
- Szerokość : 328 mm
- Wersja: RTR
- Wiek: 14+
- Wysokość: 156 mm
- Scale: 1:10
- Length: 415mm
- Width: 328mm
- Height: 156mm
- Weight: 1780g
- Engine: GO18
- Gear ratio: 10.4:1
- Speed: up to 100km/h
- Drive: 4×4
- Axis spread: 290mm front/295mm rear
- Track gauge: 30mm
- Wheels: 120 x 60mm
- Fuel recommended: Tornado 16% or 20%
- 2.4GHz radio
- Startup: plucked
- VRX Blade RTR Nitro
- 2.4GHz radio
- Polish manual
Wymagane do uruchomienia (nie zawarte w zestawie)
- Nitro 16% or 20% fuel recommended for 16 or 20 Tornado Car
- Bottle for refueling
- Clip for spark plug ignition with charger
- Wrench for spark plugs and wheels
- Fuel filter
- Oil for air filter
- Oil for engine conservation
- 8x AA batteries for the transmitter
- 4x AA batteries for the receiver or appropriate package
- Extra spark plug
- Contactless thermometer