Description
For the first time in Poland! – we present you a high-quality model Cessna 182 SkyLane V1 RTF produced by Sonic-Modell.
The presented plane was made entirely of EPO foam, thanks to which it is flexible and durable, and at the same time, it does not weigh much on such a large airplane model. These features make it able to withstand many falls without major damage. An interesting solution is the steering and torsional front wheel, which makes it much easier to maneuver the model on the runway.
The model has a powerful brushless motor, which, combined with a powerful LiPo battery, gives you enough power to take off from the short runway, and in the air translates into high flexibility!
Due to the size, class 500 is up to 1.4m wingspan, we recommend modelers with at least minimal experience in piloting RC aircraft!
The presented set contains a good class 4-channel 2.4GHz transmitter. It has a built-in antenna, V-tail and Elevon mixer, reverses and digital trimmers. Another advantage is the large range up to 600m!
The presented RC plane is an RTF model, i.e. ready to fly straight out of the box, the only thing you need is 8 pcs AA batteries to the transmitter, which you can also buy in our store.
Dane techniczne
- Akumulator: LiPo
- Długość : 1030 mm
- Kanały: 4
- Rozpiętość: 1410 mm
- Wiek: 14+
- Radio: 2.4GHz
- Materiał wykonania: Pianka EPO
- Wingspan: 1410mm
- Length: 1030mm
- Weight: 930g
- Wings’ area: 27.35dm2
- Engine: brushless 800kV 8500RPM
- Torque regulator: Skywalker 30A, 2-3S LiPo, BEC 2A/5V
- Servomechanism: 4x 9g
- Propeller: 11 x 47
- Battery: Li-Po 11.1V 2200mAh 25C
- Remote controller: MC4 2.4GHz 4-CH, powered by 8x AA 1.5V battery
- Receiver: MC6DR 2.4GHz 6-CH
- Charger: 2S-3S LiPo 800mA 12V
- Controlled front wheel
Skład zestawu
- Cessna 182 SkyLane V1 class 500 EPO RTF
- Remote controller 4CH 2.4GHz
- Battery Li-Po 11.1V 2200mAh 25C
- Charger 2S/3S LiPo Charger 12V
- Propeller with a cap
- Underbody with 3 wheels
- Wing’s bracket
- Carbon tube
- Glue for tail attachment
- Jumper for binding the transmitter with the receiver
- Manual
Wymagane do uruchomienia (nie zawarte w zestawie)
- DC Power supply 12V GPX 12V 5A
